模型分享，侵权联系删除

Thanks for visiting!

Trying different variations of flags and I thought this one really popped out at me. Hope you enjoy.

They come out fairly thick so it has a nice feel to it.

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA HueForge Navy Blue 1.3 Transmission Distance: 8

PLA BambuLab Matte Dark Red Transmission Distance: 1.5

PETG JAYO White Transmission Distance: 6

Swap Instructions:

Start with Navy Blue 1.3

At layer #10 (0.88mm) swap to Dark Red

At layer #15 (1.28mm) swap to White for the rest.