Vase (Spiral Theme) Dimensions: 95mm X 195 mm; The prototype is tested on Qidi Tech X-Plus printer with 0.4 mm nozzle. Material: ABS (niceABS); Print Settings: Extruder: Flow: 100%; Retraction Distance: 1.5 mm; Retraction Speed: 30 mm/s; Layer: Layer Height: 0.2 mm; Line Width (Inner Wall, Outer Wall, Top, Bottom): 0.35 mm; Line Width (Infill): 0.42 mm; Initial Layer Line Width: 130%; Wall Line Count: 3; Top Layers: 4; Bottom Layers: 3; Top/Bottom Patterns: Lines; Fill Gaps Between Walls: Everywhere; Infill: Infill Density: 50%; Infill Pattern: Zig Zag; Infill Overlap Percentage: 30%; Infill Before Walls: Yes; Additions: Z Seam Alignment: Sharpest Corner; Skin Overlap Percentage: 30%; Combing Mode: Within Infill; Build Plate Adhesion Type: Brim; Brim Width: 8 mm; Speed: Infill Speed: 50 mm/s; Wall Speed (Outer, Top, Bottom): 25 mm/s; Wall Speed (Inner): 40 mm/s; Initial Layer Speed: 25 mm/s; Travel Speed: 80 mm/s; Minimum Layer Time (Body): 7 s; Temperature: Printing Temperature: 220 deg; Build Plate Temperature: 100 deg; Cooling: Initial Fan Speed: 25% Regular Fan Speed: 100% Regular Fan Speed at Height: 0.7 mm; Support: Support Placement: Touching Buildplate; Support Overhang Angle: 43%; Support Pattern: Zig Zag; Support Density: 15%; Support Z Distance: 0.2 mm; Support X/Y Distance: 0.2 mm; Support Interface: Enabled; Support Interface Thickness: 1 mm; Support Interface Resolution: 0.3 mm; Support Interface Density: 70%; Support Interface Pattern: Lines; Support Structure: Normal.