Hello,

I spent a lot of time on this model, and I hope you'll like it.

Please remember that the tolerances of printers vary; the main problem is the locking mechanism, which is adjusted according to my printer's parameters. However, if you find that one of the locking mechanism parts is too loose or cannot be connected after printing the model, I have prepared an alternative version with different dimensions, which I hope will solve this problem.

When assembling the model,Don't be afraid to apply force, but remember to properly prepare one side before pressing the opposite side. Otherwise, there's a high risk of parts getting damaged.

First, fold the box, then open it and insert the folded interior. Don't do it the other way around!

Be careful to trim the raft layer around the locking mechanism! Otherwise, it will be too tight. I recommend using a knife for this.

I'm a beginner in 3D printing, so I'm happy to hear any suggestions for model improvement and will do my best to implement them. Thank you to everyone who printed and commented on this model. It's given me a great motivation to keep working.

Have fun!

Take a look at my other models! :)

1. https://makerworld.com/en/models/649862#profileId-576349
2. https://makerworld.com/en/models/504769#profileId-420419
3. https://makerworld.com/en/models/542032#profileId-459602
4. https://makerworld.com/en/models/586849#profileId-508119