A bracket to add an additional shelf to this style workbench https://www.amazon.com/dp/B0D969S4VC (should fit a variety of different length workbenches). A simple 3/4" x 16" x 4' edge glued board fits on top of these brackets forming a very sturdy shelf (no wood cutting required).

Installation

Remove a leg from the table and slide the bracket on to the leg with the hole in the bracket matching the hole in the leg. Screw in the M10 bolt at the desired height. Repeat for the other legs.

Bill of Materials

• 4x M10 x 10-25mm hex bolts (2 of these bolts came with my table so you might only need to buy 2 more).

• 1x 3/4" x 16" x 4' edge glued board (For example https://www.menards.com/main/building-materials/lumber-boards/boards/mastercraft-reg-1-x-16-edge-glued-board/1035045/p-1537252055635-c-13115.htm)

Print Settings

• Use at least PETG for strength

• Print with 5 perimeters to make the sides solid