A quick print to add some festivity to small objects. Requires only a single filament change. 

There are two versions of the model, one with a built-in brim on the ball for easy printing and one that has no additional supports in case you want to scale it or use your own method of supporting the little ball at the end. 

Printing instructions: 

• Use your normal printing settings
• Add a filament change after 6mm height
• Fuzzy skin is recommended. I used 0.4 distance, 0.3 thickness for the white part and 0.4 distance, 0.1 thickness for the red part.
• If you printed the version with a brim, peel it off in the direction of the infill for the cleanest results.