A quick wall-mounted document holder with hex pattern, modeled in OpenSCAD. The following defaults were selected for the attached STLs:

• One model for each paper sizes A4, A5, A6, A7, A8

• One model for each orientation horizontal & vertical

• A horizontal clearance of 5mm on each side of the paper

• A vertical clearance of 15mm (so the paper sticks out of the holder a bit)

• A depth of 10mm at the bottom and 25mm at the top

• Wall thickness of 3mm

These values and more are customizable in the attached OpenSCAD file, relies on the BOSL2 library.