With this remix we removed the need for the heat-set threaded inserts to attach the cover and GoPro mount to the base. These components are expensive and take special equipment to insert them into the base and activation surface. We also replaced the 1/4 inch bolt with a printed post and a screw-in collar (with its own Teflon tube lining) to make the connection between the activation surface and the internal spring more stable and the action smoother. Because the post has to be printed vertically, it is sensitive to horizontal stresses. You may want to use a 1-1/4″ x 1/4″ hex head bolt for greater strength, instead.

Download the files and then go to my website at: https://wp.me/P9evBA-4D to learn more about additional parts that are needed and how to assemble everything. If you're interested in helping to improve on the design of the Volksswitch go here (https://wp.me/P9evBA-7) and provide your contact information.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.1 mm

Infill:

Notes:

print the post with additional perimeters and 100% infill to make it as strong as possible.

Post-Printing

Download the files and then go to my website at: https://wp.me/P9evBA-4D to learn more about additional parts that are needed and how to assemble everything.