MiniWhip Power Injector Case with 9V battery

This is a case for the power injector delivered with my miniWhip active antenna.

The Case has two holes to lead out the antenna and receiver connections via BNC sockets.

Power for the antenna is provided by the internal 9V battery or an external power supply via a hollow jack socket.

I have added two shottky-Diodes (SB140) to decouple both power supplies and added an 250mA polyfuse. (If you use the Shottkey diodes, then you should short out the diode on PCB to minimize voltage drop).

Print Settings

Printer Brand:

Anet

Printer:

**Rafts:**

Doesn't Matter

Supports:

**Resolution:**

0.4mm

Infill:

Category: Other