It can be printed all at once or in separate parts. I printed the trophy for first place at 200% scale and changed the color for the top part of the trophy. Such a model (as shown in the picture) takes over 15 hours to print on the MK3. Settings used: 210°C nozzle, 60°C bed, handmade enclosure, 0.3 mm layer height.

The trophy for second place was printed at 150% scale with a color change for the top part of the trophy. This model (shown in the picture with a translucent top) takes approximately 5 hours and 40 minutes to print on the MK3. Settings used: 210°C nozzle, 60°C bed, handmade enclosure, 0.3 mm layer height.

The trophy for third place was printed at 100% scale with a color change for the top part of the trophy. This model takes approximately 2 hours and 12 minutes to print on the MK3. Settings used: 210°C nozzle, 60°C bed, handmade enclosure, 0.3 mm layer height.