This are parts for the GE spiral mini tree. It's designed to use 20mm electrical pipes (e.g. https://www.obi.at/leerrohre/isolierrohr-starr-en-20-laenge-2-m/p/1846310 )

I cutted the 2 meter pipe in the following dimensions:

25 cm for every leg
90 cm for the main shaft

so you'll need one 2 Meter pipe for every Spiral mini tree

Drawn from scratch but It's heavily inspired by https://www.thingiverse.com/thing:4680632 and https://www.thingiverse.com/thing:4905635
Thanks to bowhunter3125 and graftyman for their great designs!

The spiral tree prop can be mounted on the top - cover with one screw and zip-ties. On the bottom its screwed to one leg (GE_SpiralTree_Stand_1x_CoverLeg_Mount.stl)

One complete set consists of:
1x GE_SpiralTree_Stand_1x_CoverLeg_Mount.stl
3x GE_SpiralTree_Stand_3x_CoverLeg.stl
1x GE_SpiralTree_Stand_1x_Base.stl
1x GE_SpiralTree_Stand_1x_CoverTop.stl

and fits on one Buildplate on my Bambu X1C. 3Mf File also provided

Center shaft has an inner structure for more sturdiness. The top - Cover is not finished yet, will be added in the next 2-3 weeks.

Designed to be secured with 4x20 Screws

Bambu Lab

Bambu X1C

No

No

0,2

10% Cross Hatch

Printed with 3 Wall loops (GE_SpiralTree_Stand_1x_CoverTop.stl: 4 Wall-loops), 4 Bottom shell layers, 5 Top Shell layers