About

Sturdy pole mount for a 23-25mm diameter pole

Designed for my spool storage setup (running two rails in parallel to place spools on top and store vertically). Holding around 20kg.

2 required to mount a single pole.
 

Approximate Dimensions

• 60mm affixing plate diameter
• 45mm total protrusion from wall
   

Assembly Instructions

Affix to a wall using four M5 screws.

Includes a side hole to optionally fix the pole in place to prevent the pole from rotating. Use a 30mm M5 screw.

Printing Instructions

• Filament: PLA
• Nozzle: 0.4mm
• Layer height: 0.2mm
• Shells: 2
• Infill: 25% (to ensure durability)
• Supports: No