Print the base then fill it with weights and seal with bondo or resin.
Print the big cage and glue it in place (I used Gloop) for a coffee mug.
Print the cage sized down (81% should be correct) to hold a soda can.

For the base weights I used this:
https://www.amazon.com/gp/product/B08K538W9P/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&th=1

You can put the small cage into the big cage!
Printed in PLA with 15% infill

Not a remix, but inspired by:
https://www.thingiverse.com/thing:5191266