Another option is to increase the clearance between the printer and the table.

It is necessary if you decide to replace the fans with less noisy,

but thicker than the original ones.

The original shock-absorbing feet must be removed from the printer body.

Cut slightly to fit the inner size of the expander.

The height of the legs is about 24mm.

The following parts are required:

• 8x M4 T-nuts (for V-slot fix)
• 8x M4x12 screw (DIN912 M4x0.7x12)
• 4x Original shock-absorbing feet

Print Settings

Printer:

Anycubic Vyper

Rafts:

Supports:

No

Resolution:

Infill:

20-25%

Filament:

None PETG, PLA

Any

Notes:

Category: 3D Printer Parts