This is a case for a QuinLED-An-Deca LED controller. I had been looking for such a case for quite some time but couldn’t find one. So, I created my own using Tinkercad. The case has a very simple design and provides enough space for the controller and one or two sensors.

Print recommendations:

• Layer height: .2mm
• Perimeters: 6 (4 if you're using a .6mm nozzle)
• Bottom / Top Layers: 5
• Material: PETG
• Infill: anything will do cause most of the case will be printed solid 

Happy printing 😊