Note: "It has been discovered that the top rails of the mount might be 1/4 inch too short for a CDM1550. It appears to have a larger heatsink.
This mount was designed around a low power CDM750. Measure before you print."

This is a vertical mount for a pair of Motorola CDM radios.
This is designed to be mounted on a wood base. 7 3/8" x 10".
Mobile duplexer mounts below vertical stack.
Covers on the CDM radios will need to be removed.
Fan mounts are for a 60mm fan.
Fan mounts will need to be epoxied to the side mounts.