Ongoing project to make a compensator that perfectly matches the TX22 Competition.

Print with a high number of walls, infill is less important. I suggest a temperature resistant material.

The threads need to be tapped into the plastic using a 1/2x28 tap. These can be purchased on Amazon for cheap.

The STL and sketchup file contain both the compensator and a jig to aid in tapping the threads. Feel free to skip on using the jig but I found it useful.

To use the jig just insert the comp into the jig, clamp down in a vice, and tap the threads through the jig and the compensator both. This helps make sure the threads are perfect once the tap reaches the comp.