These parts should fit most Ikea beds and slats, they are mostly standard

I have an Ikea Tarva bed frame with a Skorva mid beam and Lonset slats. This has been a great bed so far, but I noticed a couple of flaws in it that has lead to the bed sagging on one side.

These parts are designed to provide more support for the Lonset slats and prevent the frame of the slats from bending meaning that only the slats themselves flex giving the bed greater support and firmness.

The middle risers simply slot over the Skorva mid beam with no fixtures. The side risers are designed to be screwed into the metal supports in the bed frame. They are designed to be fitted with self tapping screws. I recommend pre-drilling the bed frame with 2mm holes to receive the screws. As a final tip, I recommend covering these with some thin felt or sticky backed carpet pads to reduce noise.

If you like my work, you can support me on Patreon

Creality

Ender 3 Pro

No

No

0.28

100%

I decided to print these as solid parts to maximize the strength, not sure if it's required but that's what I did.