Summary

This is 100% taken from the idea by Keith's Test Garage and the HoleyDesk Project.

When you come to drill the holes in your desk, use this to mark them out and ensure you are at 96mm hole centres.

I've made sure there is a cross on each point to allow you to better orientate yourself and also to make it easier to go at a right angle.

I've also added a hole at 50mm from the edge to make it easier to mark out for the steel strip (50mm is nice and standard in the UK/EU).

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Supports:

Resolution:

200

Infill:

Filament: PolyMaker PLA

Notes:

I use 02mm settings in Cura.

オリジナルリンク: 詳細を見る

CC BY