A very simple mount for the Shahe digital Inclinometer.

You will need two Multiconnect connectors.

I added space for two 6×2 mm magnets (same as for gridfinity) to improve the connection and make attaching much more satisfying.

→ Pause the print at layer 22 and place the magnets inside before continuing.

Recommended Print Settings (Multiboard defaults):

Nozzle: 0.4 mm

Walls: 3 perimeters

Layer height: 0.2 mm

Infill: 15%

Supports: No supports needed

Material: PLA or PETG is sufficient