I designed this mount to be used with this setup Thing ( https://www.thingiverse.com/thing:2477180 ). I printed the arms and attachment system for my Tevo 2040 bottom frame, then designed a mount in Rhino 3d for a Pi V1.3 camera I found on Amazon.

This was used in conjunction with this pi v1.3 camera and mount system.

https://www.amazon.com/gp/product/B07SS94J2X/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

You build the camera as is with the case surrounding it, then attach it with M5 screws OR smaller screws to the base, secure with nuts. I made it with a slight downward angle because the camera case tilts the camera up a little.

If using M5 hardware, you have to dremel (which is way easier and safer) OR carefully drill the holes a little larger on the clear plastic pi mount case.You could use smaller hardware if you wish, and totally avoid dremeling all together. I originally made this for M5 x 16mm button cap screws. Use nuts on the bottom of the base to keep it in place from moving. You don't need to crank them down.

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: Hatchbox PLA White

Notes:

How I Designed This ===================

Bottom view, with 2 nuts. Pictured here are M5 x 16mm.

Holes are for M5, but may need a test fit before installing them to make the hardware fit better.

Category: 3D Printer Accessories