Mini Vise
Extra parts you need:
1 M8x80mm Poelier Bolt
2x M8 Nuts
6mm tube (I used brass tube, other materials can do the job)
2x 5mm plastic expansion plugs

Please note :

• One of the nut is included in the vise so you need to stop the printer in order to introduce the nut in the part.
• Brass tube : cut 2 parts of 65mm long then make an axial cut as you can see on the file "Brass_tube" then insert the tubes in the vise. The expansion plugs will hold the tube in place once inserted. A screw can help.
• I made a 3mm hole an inserted a small aluminum tube in the screw to hold in in place during the vise opening (see pictures)