Bring Clone Force 99 to your display shelf with this Bad Batch–inspired plaque featuring the dog tags of each squad member. Designed to look like a collected set of their IDs, this model makes a perfect companion piece for helmets, armor builds, or any Star Wars–themed setup.

I originally saw someone do a design similar to this in wood and decided to bring it to 3D printing! If anyone knows the original maker, I would love to know!

Magnets hold the dog tags in place so you can take them out to look at them and pop them back into place without worries of them falling out.

The holes in the plaque for magnets are for 8mm x 3mm magnets, but the wholes are only 1mm deep so the magnets will stick out a bit.

There are holes inside the dog tags as well for magnets to be placed in the middle of the print. These holes are for 6mm x 2mm magnets.

.18 layer height on all

3 walls, top, and bottom shell

For .18 layer height, I paused at layer 15 for the dog tags, added the magnet, and resumed printing. Then, I paused at layer 34 to switch from black to silver.

For the plaque at .18 layer height, I paused at layer 13 to switch from black to brown (or wood), and then paused again at layer 83 to switch back from brown to black.