I'm the kind of person that can put something down and manage to lose it within moments. With this in mind, I set out to find a tool holder that would meet the following criteria:

• Hold ALL tools included with the printer
• Fit within the physical footprint of the printer - doesn't hang off the sides in any way
• Be easy to install and remove without additional hardware
• Not interfere with other common modifications

While I found many tool holders that met some of these criteria, nothing seemed to meet them all, so I decided to quit being lazy and make my own. While designed for a modified CR10S Pro V2, this will fit any printer that uses a 2040 extrusion horizontally, so long as you're either willing to sacrifice about 5 inches of print height (or like me, just take the tools out temporarily when printing taller objects).

ToolHolder Mk 1 - Holds the following:

• Five Allen keys
• One single-ended wrench
• One double-ended wrench
• One each Phillips and slotted screwdriver
• Spatula
• Side cutters
• USB MicroSD adapter
• Feeler gauge
• MagiGoo bottle
• Standard school glue stick

ToolHolder Mk 2 - Holds the following:

• Five Allen keys
• One single-ended wrench
• One double-ended wrench
• One each Phillips and slotted screwdriver
• Spatula
• Side cutters
• USB MicroSD adapter
• Feeler gauge
• Three MicroSD cards
• Three MicroSD card adapters

The Creality logo was sourced from this excellent STL: https://cults3d.com/en/3d-model/various/creality-logo (Creator Kuba104)

Inspiration comes from FirstRidge's tool holder (https://www.thingiverse.com/thing:3403492). This is a nice little tool holder that fit well and printed fast. However, I wanted something that held more and wasn't confined to the corner of the printer.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.16 (or your preference)

Infill:

Filament: GST3D PLA

Notes: