This is a replacement for the tall posts used to hold up the right side of the bagatelle mini playfield on Williams' 1986 pinball machine "Pin*Bot." These posts are effectively impossible to find, necessitating 3D-printed replacements.

For best results, it is recommended to have the post printed in steel. However, it is also possible to make a completely usable post on an FDM printer using PETG or nylon.

This model has been modified slightly from the original measurements in order to make it sturdier and less prone to bending at the thinnest section of the post.

The threads will need to be tapped on the top with a 6-32 tap and on the bottom (stud) with an 8-32 die.