Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x112.5mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA Kexcelled Fluorescent Yellow Transmission Distance: 8

PLA Kexcelled Pinkish Blue Transmission Distance: 2.2

PLA BambuLab Tough Cream White Transmission Distance: 10

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Yellow

At layer #14 (1.2mm) swap to Blue

At layer #21 (1.76mm) swap to White for the rest.