LA Rams Hueforge
 

No AMS required, just switch filamant at Layer pause.

Don't forget the frame.

Frame for LA Rams Hueforge by Dohara | Download free STL model | Printables.com

If using a frame there is some overlap. I plan to upload a new version for the frame.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA+ IIID Max Gold Transmission Distance: 9
PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to Blue
At layer #6 (0.56mm) swap to Gold
At layer #18 (1.52mm) swap to White for the rest.
 

I spend a lot of time designing and allow it all to be used for free (including commercially).

If you'd like to help me out, below are the possible ways. Thank you in advance!

https://www.buymeacoffee.com/dohara1985o

Venmo: Dohara1985

Paypal: @Dohara1985