This will securely mount your Picobilical to your WWG2 extruder. There are a few different versions depending on your setup. In the pictures, I have installed picobilical_mount.stl and mgn7h_carriage_with_integrated_spacers.stl, and I am using LDO's knurled M3 spacers they supply with a lot of their kits. If you don't have the spacers, you can download the one included in this model's files. BOM will change a bit based on your setup, but generally:

• 2x M3x6 for the motor mount points
• 2x M3x8 for the PCB mount points
• 2x M3x5x4 heatset inserts for the PCB mount points
• 2x M3x10 for the carriage mount points
• 4x M3x5x4 heatset inserts if you need to use the printed motor mount spacers

For a simpler setup, you can forego the additional carriage mounting points completely by printing picobilical_mount_no_carriage_stabilizers.stl.

Enjoy! Please let me know if you have feedback or need a small change, and I will see what I can do.