CFL Bulb Removal and Install Aid

•One design works for 40w, 60w and 25w (mini coil) CFL bulbs.
•One design for 100w CFL bulb.

The variety of bulbs I have are similar but, different enough so, this Aid provides enough clearance for all of mine - thus, I imagine it will work on All 40/60w CFL’s.

May want to add Cardboard in space to Hold bulb firmly when installing ceiling. Squish the cardboard to make it thinner if needed.

Mount directly onto a Handle for Mop, Broom, Squeegee...etc.

Versions for PVC mounted, Mop/Broom/etc mounted.
Use the Adapter for mounting the Threaded version onto PVC ( 3/4” schedule 40 ).

The threads on Mop/Broom/etc and non-standard and are different on the various one’s I have. Thus, I designed to fit on ALL of them.

Align the Thread Entry on Adapter with Thread start on CFL holder...

See photos...

Printing:

Can use supports on the thread pocket (on holder). No supports on Threads.
No supports needed on the Adapter.

Use 'Z' height of 0.2 (or, 0.1) for good Threads.

Use the THD_Test part to Print-Test the Internal threads.
You can Test print the External threads by printing the Adapter (can sink it into the Print bed to save time).