Wife wanted a box to fit her new Kitsch soap bars that could also function as a traveling box, so I made this.
Seems to do the job, I made drain holes in the bottom.
My first fusion project, hope somebody out there can use it.. 
 

Also added a box+lid for a single soap bar.

Please orient box so the drain holes are facing the bottom, and bigger side of lid as bottom as well. See pictures if in doubt..
For this I used the following settings;

Box printed with:
0.6mm Nozzle
Line Height: 0.32 (Higher resolution will probably look and feel smoother, but this works fine for wifey)
Infill: 25%
Perimeters / Walls : 2
Supports/Brim/Raft: None

Lid printed with:
0.4mm Nozzle
Line Height: 0.3
Infill: 20%
Perimeters: 3
Supports/Brim/Raft: None