Morocco flag keychain designed in Oneshape. 
Dimmesion: 37x27x2.55 mm 
Print time is more or less around 17m at 0.16 layer heigh (0.4 mm nozzle).
Print time is more or less around 15m at 0.20 layer heigh (0.4 mm nozzle).

Print parameters:

• Layer height - 0.20 mm or 0.16 mm
• Perimeters - 3
• Infill - 10%
• Brim - NO 
• Support - NO
• Raft - NO
• Filament type - PLA or any

Could be printed in multicolor without MMU, AMS or similar.

For multicolor print:

When printing at 0.2 layer height: put the printer in Color Change mode(G-code M600) at layer 12 and then change filament
When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 14 and then change filament