Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 92.27x200mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.3mm and the Actual Depth is 2.4mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Prusament Galaxy Purple Transmission Distance: 4.7
PLA Prusament Lipstick Red Transmission Distance: 3.3
PLA BambuLab Matte Dark Brown Transmission Distance: 2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (1mm) swap to Galaxy Purple
At layer #13 (1.16mm) swap to Lipstick Red
At layer #15 (1.32mm) swap to Dark Brown
At layer #18 (1.56mm) swap to Lipstick Red for the rest.