Two piece shell for the usb Li-Hv lipo charger that comes with the Happymodel Mobula6. It has holes for the charging status lights (center for Li-Hv, end for normal Lipo batteries).

This model requires gluing on the chamfered edges and optionally recommends a dab of glue on the underside of the PCB.

You may need to clip the pins on the connectors if they protrude further than 1 mm from the bottom of the PCB.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: Any PLA Silk Silver

Category: R/C Vehicles