I know there are plenty of pump-action kits out there, but I was feeling picky.

This is designed to work with the Recon's stock cosmetic barrel; I don't have much storage space, so I didn't want to add another barrel part to the pile. It should also be completely reversible just with the removal of a couple screws. Whether this is all a good thing or not remains to be seen.

Planned revisions and additions:
-Add screw points to the Bolt Clamps
-Add optional dart holder on connecting bar
-Linking Plate with Rail

Airwolf 3D

AW3D HD

Doesn't Matter

Yes

Let's get this clear right off the bat: I really just made this for me, so it's kind of on the janky side. There are, without a doubt, better kits than this. But... well, it's mine. Alright, with that out of the way...rnrnRegarding the bars:rnPrinted parts are way too fragile for this kind of application, so I used aluminum bars from the hardware store (0.5W x 0.0625T, I think). I picked aluminum because it's light and easy to work with, but also strong enough for my purposes. The SolidWorks model has regularly spaced holes, but I actually just drilled as I needed. You'll need to do the same, but it's not too hard; I don't think you need even a ruler for this, just mark and drill.rnrnRegarding the clamps:rnMy original plan was to attach the bars straight to the bolt sled, but that didn't work out, so I instead opted to clamp it onto the priming handle by the top rail. You'll have to attach the bars to Clamp A first, which means screwing them on from the inside. It's not a great idea, but it works. As for the linking plate that attaches Clamps A and B together, I just used some self-drilling screws I happened to have. (I warned you this thing was kind of janky)rnrnRegarding the handle:rnI wasn't sure about cutting parts of the barrel rail to get this to fit, so I instead made the handle's rail mount with features allowing easy trimming to fit. This makes the rail portions a little flimsy, but it hasn't failed me yet.rnrnRegarding the hand grip:rnBorrowed the design from CaptainSlug; There are plenty of other grips out there, but this one appealed to me. But I couldn't figure out a clever way to attach it, so I just screwed it into place.