🇰🇭 កមពជ 🇰🇭
 

If you are Khmer, a vexillologist (look it up!), have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for you!

Check out my other flag models available!

You can sell these but please give credit, review & post photos of your prints back here!

3D PRINTING SETTINGS

90 mm diameter

3 mm height

All parts are printed separately, one by one. I used a textured print bed and flipped the STL upside down in my slicer to have the texture on the side facing up when finished. You can create texture contrast by doing this with some parts but not others. The white part must be printed normal, with the flat side on the print bed, otherwise you might have undesired results because of the detailed carvings to draw Angkor Wat. Print the blue part twice, of course.

You can also get creative outcomes by printing with interesting infills and no top layers, for example!

Parts already include enough tolerance to allow an easy assemble. Very minor cleaning might be necessary for a good fit, especially if your printer produces blobs, zits or elephant foot.

I set mine on a cork circle with self-adhesive. You can glue to normal cork, felt, wood, or whatever you like, as well as scaling to whatever size you like.