This is a bracket I designed so that you can take timelapse videos with your Elegoo Neptune 3 series printer using a DSLR camera. This was modeled in Fusion 360 and prints pretty quickly with some simple settings, There are holes for M2 machine screws and they fit either flush through the bottom of the assembly or can also be screwed in from the top tightly. There is a cable tie slot so that you can secure your micro switch to camera trigger wiring to this assembly. There is also some empty space on the right side if you want to add a logo to it in Fusion 360. Full video located on my YouTube Channel 

Filament type: PLA
Hot End Temp: 205C
Bed Temp: 60C
Print Speed: 60mm/s
Adhesion: Brim
Supports: Yes
Support Type: Tree (touching buildplate)