Raspberry Pi camera mount
justin1994
AIで類似品を検索
印刷プロファイル(0)
モデルファイル(0)
0
0
0
公開日時:2026-02-19 17:29:00
0
0
000説明
タグ
モデルソース
レビュー(0)
Update:
After a few days installed on the printer the PLA is starting to take on a set and loosen it's grip on the camera casing and bracket ball. I am going to try printing the bracket and socket in PETG.
This is a case and bracket with ball mount for a focusable Pi camera.
There are two different types of frame mounts a tabbed version and ball version.
There are two different sizes of frame mounts for 2020 and 3030 extrusions.
To assemble you'll need two M3 x 16mm screws and M3 nuts.
Fits are tight to prevent moving due to vibration.
Print Settings
Printer:
HyperCube Evolution
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
30% and 50%
Filament:
3D Solutech PLAReal Black
Notes:
The case is printed at a minimum of 30% because at lower infill some small areas would not have any infill.
The other parts are printed at a minimum of 50% for additional strength.
- The front and back of the case, and 3030/2020 tabbed frame mount are oriented correctly for printing and do not require support.
- The 3030/2020 ball frame mount requires support everywhere.
- The socket is oriented correctly for printing and requires support from the build plate only.
- The bracket should be oriented standing on the ball with support from the build plate only.
- The link is printed flat on the build plate.
For tabbed frame mount:
- Print two links
- Print one of everything else.
For ball frame mount:
- Print two links
- Print two sockets
- Print one of everything else.
タグ
モデルソース
オリジナルリンク: 詳細を見る
CC-BY