This is a 3D-printed protective case designed for swimming goggles. The case features two hinges, secured with M3x16 mm hex socket screws and M3 square nuts. One side of the case is perforated with a hexagonal pattern for ventilation.

The closure system uses four strong 6x3 mm magnets, ensuring a firm and secure closure. This case provides excellent protection for your goggles, keeping them safe from scratches and damage while allowing airflow for drying.

Print Settings:

• Layer height: 0.2 mm (recommended)
• Infill: 15-25% (for durability)
• Supports: Not needed
• Material: PLA, PETG, ASA (for better durability)
• Wall count: At least 3 perimeters
• Bed adhesion: Not needed brim or skirt
• Assembly: Requires two M3x16 mm hex socket screws, two M3 square nuts, and four 6x3 mm magnets and some super glue for securing magnets.