I was looking for a wide angle camera for my Voron trident and I found this one on amazon. Amazon.com: SVPRO 5MP 30FPS USB Camera Wide Angle Video Camera for Computer,IMX335 Sensor High Resolution Box Camera Small USB Security Camera for 3D Printer,Laser Engraver,Machine Vision Camera for Industrial : Electronics

It was perfect for my Voron trident since the frame is so close to the toolhead this wide-angle camera showed the whole plate. But I needed a mount for it, so I jumped on Fusion 360 and after a few iterations I came up with this. You can mount the camera up wards if you have a top hat or from the bottom if you have the plex glass on the frame. If you have the camera on top use the heat set hole closer to the front. if you mount the camera on the bottom use the hole closer to the rear. I included the fusion file if you want to move the mounting holes around. Enjoy and happy printing.

BOM:

2 x M3x12

1 x M3x6

2 X M3 heat set inserts

2 X M3 T-nuts

Crowsnest config for this camera:

For best resolution

resolution: 1920x1080
max_fps: 30