There is a collet to fit a soldering iron into the press.

A spacer for the lever to prevent movement from side to side when pulling down on the lever.

A Brass bit holder, and a cable clip for the Iron cord that slots on top of the upright tube.

I drilled and tapped two M3 holes to fit the bit holder to the side.

I used PETG.

None of the parts require supports.

Drill stand model is in the link 

https://www.amazon.co.uk/dp/B08PC66XNN?psc=1&ref=ppx_yo2ov_dt_b_product_details