Project: HueForge-Fox 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.3x200mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Overture Royal Copper Transmission Distance: 2.4
PLA Overture Orange Transmission Distance: 7.1
PLA Overture Matte Yellow Transmission Distance: 3.6
PLA Overture White Transmission Distance: 4.4
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Royal Copper
At layer #12 (1.04mm) swap to Orange
At layer #18 (1.52mm) swap to Yellow
At layer #22 (1.84mm) swap to White for the rest.