Summary

French Fighter that almost was.
Powered by an inverted air-cooled v-12, so the exhaust stacks are on the bottom.

not a good print, but it worked.

model in full dimensions in blender 2.80 and exported from blender 2.79b* at 1/100 for the .stl file
scale down to 35% in the slicer.

I've had issues exporting .stl's from 2.80 for Cura; 2.79b and 2.80 export the same mesh to different file sizes, too. So I export the mesh from 2.79b for consistency's sake.

as usual, the dice are 15mm for reference