Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Dark Green Transmission Distance: 3.8
PLA Smart Recycled Green Transmission Distance: 6.5
PLA Smart Recycled White Transmission Distance: 5.7
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.68mm) swap to Dark Green
At layer #16 (1.4mm) swap to Green
At layer #25 (2.12mm) swap to White for the rest.