Combustion lining with extra supports
heroicrocket
AIで類似品を検索
印刷プロファイル(0)
モデルファイル(0)
0
0
0
公開日時:2026-02-12 09:22:09
0
0
000説明
モデルソース
レビュー(0)
This is a remix of the combustion lining part for the 3D printable jet engine, inspired from: https://www.thingiverse.com/thing:2441852
The top of the support has horizontal protrusions to fully support the otherwise unsupported part.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
25
Filament: eSUN PLA+ Fire Engine Red
Notes:
The support itself is 0.4mm wide (i.e single perimeter with a 0.4mm nozzle), so some slicer settings may need to be tweaked so that the support does not get discarded.
* To slice with PrusaSlicer you will need to enable the "Detect thin walls" setting. * To slice with Simplify3D you will need to set "Allow single extrusion walls" in the "External Thin Wall Type" setting in the Advanced tab of the FFF settings. * Cura seems to be able to slice the model just fine without tweaking any settings.モデルソース
オリジナルリンク: 詳細を見る
CC-BY