Three Vases inspired by the Bauhaus Art Movement of the late 1920's, emphasising function, simplicity and geometric forms.

Printing

These can be scaled up or down as you need. Print them in Vase/Spiral mode (make sure to enable Smooth Spiral if you have it). Increase the Line Width to near double your nozzle diameter, and have a large amount of Bottom Shell Layers. For instance with a 0.4mm nozzle I used a standard 0.2mm layer height, set all Line Widths to 0.7mm and used 10 Bottom Layers.

For the glass-like vases I used Jayo/Sunlu Transparent PLA+ and printed very slowly, 40-60 mm/s. Also enable Small Perimiter slowdown if you are printing them smaller.

If you like these models, then please:

EdinBearDragon