Standard US 4-way stringer pallet that is 1/16th scale.

There are two different STL files you can download. One has the "planks" (deck boards) on the top and bottom of the pallet, the other STL file has the deck boards on the top only and nothing underneath.

(63mm x 76mm x 7mm)

(2.5" x 3" x 5/16")

If you print it with the top upside down (so that the side with the most "planks" is on the bottom) you shouldn't have to print with supports.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

15%

Filament: Prusament PLA 
 

Notes:

Print either of the pallets upside down (so the side with the most "planks" is on the bottom) when slicing to prevent the need to use supports.