This dice tray will fit in the regular size catan game boards and can substitute the desert. It accounts for the tile height and road and settlement dimension so these pieces could be set as usual.

• Printer: MK3S+
• Material: PLA
• Nozzle: 0.6 mm
• Layer Height: 0.40 mm
• Time: 1 hour (and 3 minutes)
• Material used: 36 g (15% Gyroid infill)
• Supports: None

Beware that it may be noisier as dices hit the box and that both dices should be thrown at the same time and from a height not very high, so the dices don't rebound. 

Any comments/feedback is appreciated.