Project: HF-Monito Dark.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 150x150mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:

PLA Smart Recycled Black Transmission Distance: 0.5

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA Smart Recycled Coral White Transmission Distance: 6.4

PLA PolyLite Grey Transmission Distance: 1

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Black

At layer #12 (1.04mm) swap to Blue Gray

At layer #15 (1.28mm) swap to Coral White

At layer #24 (2mm) swap to Grey

At layer #26 (2.16mm) swap to Coral White for the rest.