The Fifine AM8 sounds amazing (for the $$) but the handling noise transmitted into the mic is HORRIBLE! This mount pretty much eliminates noises that typically come through the mic stand.

PLEASE read the notes below, describing how to print each of the 3 components.

Creality

Ender 3 Pro

No

Yes

0.2mm

20-100% (see notes)

Outer Ring:
no supports needed
wall count: 5
top/bottom count: 5
infill 20-100% (I used 100%)

Inner Ring:
supports needed
wall count: 5
top/bottom count: 5
infill 100%

Thread Mount:
threaded for a 5/8" mic mount (suggest using insert adapters listed below)
wall count: 5
top/bottom count: 5
infill 20%

Parts:
5/8" to 3/8" mic adapter (will survive threading & unthreading more than the printed threads)
https://a.co/d/fLhkoyI

4mm black hair elastics (I used Scunci brand and the I.D. was about 44mm and as small as I'd recommend)
https://a.co/d/3emzdmI

(2x) M4 x 8mm allenhead bolts to mount mic to inner ring
(2x) M4 x 12mm allenhead bolts to mount thread mount to outer ring
(2x) M4 nuts to mount thread mount to outer ring