Button Wells with drill hole guide for Gameboy Zero project.

Instructions:

1. Super glue in position the button wells by resting against existing A-B button wells.
2. Drill pilot hole (3mm) using guide from reverse side.
3. Recommend to use stepped drill bit and drill 11mm hole from the front side.

NOTE: Do not drill full size hole 11mm from the reverse side as it can cause the button wells to crack.

UPDATED: REV 1: Reduce height of wells 5mm->4mm and pin from 8mm->5.5mm.
Pin interferes with PCB

Wombot Exilis XL

No

No

0.1

100%