One more holder for the Orbit mini-sprinkler . Normally these are "screwed" into a pipe, but the way I use them, is plug at the end of an irrigation tube.

I made 2 models of holder: one that is straight, and the second that is at a 45 deg angle.

sprinkler used is the following:
https://www.homedepot.ca/en/home/p.12-pat-low-vol-sprinkler-2-pack.1000117605.html

have fun and enjoy !

QIDI Tech 1

Doesn't Matter

Doesn't Matter

0.2mm

10%

Filament used : PLA
Temp: 230 Deg
bed : 60 deg
Speed 90 mm/s